Bilge Pump – Submersible; 900 Gallon Per Hour – RULLP900D

Description

Bilge Pump – Submersible; 900 Gallon Per Hour – RULE LP900D

If water is sensed, the pump will spin the impeller as a double check. If water is confirmed, the pump will run to empty the bilges. The pump body rotates to allow discharge in any direction. A selection of straight and 90 degree ports, and a non-return valve for use with straight ports, are supplied.

Attributes

• Type: Submersible
• Voltage Rating: 12 Volt DC
• Flow Rate: 900 Gallon Per Hour
• Port Type: 3/4 Inch/ 1 Inch And 1-1/8 Inch Hose
• Length: 2.4 Inch
• Width: 2.4 Inch
• Height: 7.6 Inch

Features & Benefits

• Features Two Automated Modes Of Operation
• High Or Low Water Sensing Mode The Pump Starts When Water Reaches 2 Inch By Turning The Motor Cartridge Upside Down, The Sensor Is At 1.3 Inch
• Electronic Automatic Mode The Pump Automatically Turns On Every 2.5 Minutes To Check For Water, And If It’s Detected The Pump Stays On Until The Water Is Gone
• Fully Rotating Discharge Body; The Entire Body Swivels Up To 180 Degree, Making The Pump Extremely Easy To Install
• Backflow Prevention; New Tricuspid Check Valves Help Prevent Backflow
• Horizontal Or Vertical Mounting; Feature A Variety Of Mounting Options To Accommodate The Boat’s Bilge
• Limited 3 Year Warranty